[El102Tel]

Has anyone found out any details on the diagnostic screen ( See http://www.youtube.com/watch?v=Q1xzl7aZPqk). As shown in vid V = velocity in kph, T = engine temp. A work mate thinks one of the other screens show fuel in the tank, with another showing space for fuel in the tank. Anyone got any other ideas?

 

[fastjetfixer]

You'll see something like this :

Hw:d1.6 7/1/06------------Hardware Issue and date

Sw: 4197a/o 15/7/04----------Software issue and date

DD:3.0/6.0 Code 008/03--??

Ls:7F000000 MS4200--??

DIMMV 12.9/5.8/5.4---------------------The dashboard illumination level

LCD:34*c u30:14.0v---LCD preheated air inlet temperature U:30 is the Battery Volts

SENS:19.0 Vt:62---SENS:?? V:Velocity in km/Hr t: engine water temp

Tc:880.01 10.5/10.9/11.4---Fuel Consumption instantaneous, medium term and long term average Voltages

Rc:880.01 5.9/9.4/7.9-------Fuel Consumption instantaneous, medium term and long term average Voltages

BUS:00000-----------------

Warn:00000---------------Suspect these are associated with Fault Codes

Ack:00000----------------Suspect these are associated with Fault Codes

Store:00000--------------Suspect these are associated with Fault Codes

RDS-T;20:51--------------RDS Time Signal eg 8:51 pm

P1-ehv oc----------------- Suspect this might be the exhaust valve
associated with the Carbon Dust recycling/dpf regeneration.
Alternatively Electrohydraulic valve associated with VVT


There is a plethora of information you can get from it but it's not guaranteed on all Zaffs.

Good luck.